BMW K 1100 LT/RS - Manual (Page 85)

11.51
• Connect the engine wiring harness (coolant stub
pipe, throttle position sensor, CO detector, injec-
tors, air cleaner housing).
• Attach cable straps (three) at fuel injection rail.
• Attach wire cables for increased idle speed and
throttle operation.
Throttle cable play....................... 0.75 mm (0.03 in)
• Install the radiator.
• Install the left engine bulkhead (1).
• Attach cable strap (2).
• Install fuel line (3).
• Install right engine bulkhead (4).
• Attach cable strap (5).
• Install coolant line (6) in bulkhead.
• Install driveline.
• Install fuel tank.
• Install radiator surround.
• Install left and right side sections.
• Install storage compartment.
• Install knee pads.
1
2
3
LT110770
4
5
6
LT110780