BMW K 1100 LT/RS - Manual (Page 62)

11.28
Assembling pistons and conrods
L
Note:
[LT] Modified conrod length and pistons from 1993
model year on
• Comply with conrod weight tolerances.
Weight tolerance .............................................± 4 g
• Assemble piston and conrod.
L
Note:
The oil bore in the conrod eye is on top in the in-
stalled position. The arrow marking on the piston
crown must point in the forward-travel direction.
• Install only pistons of the same make and the
same weight category.
e
Caution:
Renew the piston pin circlip each time it is removed.
Removing and installing crankshaft
pinion and rotor flange
X
Tightening torque:
Machine screw ............................................. 50 Nm
1
2
LT110410