BMW K 1100 LT/RS - Manual (Page 188)

23.14
Removing and installing shaft sealing
ring for gear selector drum
• Switch for gear indicator removed.
• Gear selector drum removed.
• Lever out shaft sealing ring with screwdriver.
• Fit shaft sealing ring using drift,
BMW No. 23 1 790 and handle,
BMW No. 00 5 500.
Removing and installing bearing shell
for taper roller bearing on input shaft
• Heat transmission housing to 100 °C.
• Remove bearing shell with the aid of support,
BMW No. 00 8 560, and internal extractor,
BMW No. 00 8 563.
• Fit new bearing shell in transmission housing
while still hot.
• Drive bearing shell to bottom of seat with drift,
BMW No. 23 1 770, and handle
BMW No. 00 5 500.
Removing and installing ball bearing
on intermediate shaft
• The intermediate shaft can only be replaced as a
complete unit.
• Remove ball bearing using universal puller,
BMW No. 00 7 500.
• To facilitate installation, heat ball bearing to
80 °C.
00 5 500
LT230140
23 1 790
00 8 560
LT230150
00 8 563
00 7 500
LT230160