Disassembling and assembling output shaft, Removing ball bearing – BMW K 1100 LT/RS User Manual

Page 191

Advertising
background image

23.17

Disassembling and assembling output
shaft

Before disassembling, measure axial clearance
of spur gear for 1st, 2nd and 5th gears.

1st gear

.... 0.10...0.30 mm (0.003937...0.01181in)

2nd gear

... 0.20...0.60 mm (0.007874...0.02362in)

5th gear

.... 0.20...0.40 mm (0.007874...0.01575in)

Set axial clearance with spacer shim rings.

As part of the overall dimension, the spacer ring
is fitted between the spur gear for 1st and 4th
gear.

Removing ball bearing

Clamp output shaft in vice with jaw guards.

Remove ball bearing with universal puller,
BMW No. 00 7 500.

LT230210

4.

5.

3.

1. Gang

2.

125.8

-0.1

00 7 500

LT230220

Advertising