BMW K 1100 LT/RS - Manual (Page 263)

34.5
Removing and installing front brake
caliper
• Mask off brake caliper at top of wheel side with
tape (rim guard).
• Release brake caliper mounting (1) and alterna
tely press brake caliper against the brake disc
and pull back (arrow) in order to press back the
pistons.
• Carefully remove brake caliper from brake disc.
e
Caution:
Brake pads must not be damaged.
• Release brake line at brake caliper and close off.
e
Caution:
Ensure brake fluid does not come in contact with
painted vehicle parts; brake fluid destroys the paint
work.
• Install in the reverse order of removal.
L
Note:
Renew sealing rings.
X
Tightening torques:
Brake caliper to slider tube .......................... 40 Nm
Brake line to brake caliper............................ 18 Nm
Bleed screw ................................................. 14 Nm
LT340010
1
LT340020