BMW K 1100 LT/RS - Manual (Page 147)

17.5
Changing coolant
Draining coolant
• Remove fuel tank.
• Release cap (1) on filler neck.
• [RS] Remove lower section of fairing
• Release screw plug (2) on water pump [RS] , or
water temperature sensor [LT].
• Note gasket.
X
Tightening torque:
Drain plug, temperature sensor ...................... 9 Nm
Filling with coolant
• Fill with coolant up to lower edge of filler neck (1).
Coolant:
Concentration (down to – 28 °C)
Antifreeze
......................................................40 %
Water ..............................................................60 %
Capacity .....................................3.0 l (0.66 Imp.gal)
Quantity in expansion tank .......0.4 l (0.088 Imp.gal)
• Crank engine with starter while kneading hose
between water pump and filler neck
• Assemble motorcycle.
LT170010
1
3
2
LT170020
1