BMW K 1100 LT/RS - Manual (Page 243)

33.7
Disassembling drive bevel gear
• Remove outer bearing race (2).
• Remove spacer ring (3) from housing.
• Clamp drive bevel gear (1) in vice with jaw guards
(splines facing upward).
• Using puller, BMW No. 00 7 500, remove both
bearings at the same time.
• Remove thrust bearing (4), inner race (5), bearing
cage (6) and outer race (7).
LT33030
3
1
7
6
5
4
2
00 7 500
LT33040