BMW K 1100 LT/RS - Manual (Page 233)

32.11
Removing and installing clutch
cable
• Remove fuel tank.
• Detach clutch cable (1) at clutch release lever.
• Pull clutch hand lever and press out nipple (2).
• Unscrew set screw (3) from fitting housing.
• Cut through cable clip and pull out operating
cable.
• Install in the reverse order of removal.
L
Note:
Ensure the operating cable is fitted correctly, with
no kinks.
• Adjust cable after fitting.
Settings:
Play at handlebar lever .........................4 ± 0,5 mm
............................................. (0.15748 ± 0.0197 in)
Cable length at clutch release lever .......75 ± 1 mm
............................................. (2.95275 ± 0.0394 in)
Adjusting instructions:
See Group 00, “Checking clutch operating clear-
ance, adjusting if necessary”.
LT320090
1
2
3