BMW K 1100 LT/RS - Manual (Page 320)

46.18
Checking frame with gauge
• Remove fairing.
• Support motor cycle with lifting gear,
BMW No. 00 1 510.
• Remove telescopic fork.
• Outer bearing race at top and bottom remain in
steering head.
• [RS] Remove left and right footrest plate.
• Release frame securing screw at gearbox.
L
Note:
After releasing the frame securing screw at the gear-
box, check that the screws can be screwed in again
easily.
If this is not possible, the frame is in all probability
distorted.
• Fit adapter, BMW No. 46 5 606, instead of se-
curing screws.
• Screw measuring discs, BMW No. 46 5 603, at
the same level on the adapter.
• Connect frame test gauge (1),
BMW No. 46 5 600,at bottom of steering head
and clamp together frame and gauge with spin-
dle (2), BMW No. 46 5 604, and crank (3).
LT460230
2
3
46 5 600
1