BMW K 1100 LT/RS - Manual (Page 168)

21.10
• Release lower retaining bolt (1) of the ignition coil
mounting.
• Secure centring fixture (2), BMW No. 21 2 670,
to intermediate flange.
• Centre driving disc with corresponding centring
pin (3).
• Evenly tighten retaining bolts (4) crosswise.
• Remove centring fixture.
X
Tightening torque:
Housing cover .............................................. 19 Nm
• Screw guide pin, BMW No. 23 1 820 , in fitted
sleeve of intermediate flange.
L
Note:
Install the short guide pin on the left-hand side.
• Install complete drive train.
LT210020
1
4
3
21 2 670
2