BMW K 1100 LT/RS - Manual (Page 256)

33.20
Removing and installing gaiter
• Remove inner retaining ring, pull gaiter out of
swinging arm.
• Install in the reverse order of removal.
• Coat inside and outside (arrows) of sealing lip
with, for example, Optimoly MP3.
Removing drive shaft
• Press off drive shaft with screwdriver.
e
Caution:
Avoid scratching painted parts;use a rubber under-
lay if necessary.
Checking universal joint for wear
• Determine axial and radial play by shifting axially
and turning radially.
Removing retaining ring
• Lever out retaining ring in universal joint using a
small screwdriver.
• Install in the reverse order of removal.
Installing drive shaft
• Coat spline of drive shaft with, for example,
Optimoly MP3.
• Fit drive shaft on output shaft.
• Engage snap ring in position with light blows
(plastic-headed hammer).
LT330300 LT330380
LT330420