BMW K 1100 LT/RS - Manual (Page 228)

32.6
• Cut open rubber grip (1) and remove.
• Release multifunction switch (2).
• Loosen clamping screw (3) of handlebar fitting.
• Remove fitting from handlebar.
• Install in the reverse order of removal.
L
Note:
Bond rubber grip with Loctite 454 on handlebar.
X
Tightening torque:
Clamping screw, handlebar fitting .................. 5 Nm
Settings:
Clutch play at handlebar lever ...............4 ± 0.5 mm
............................................. (0.15748 ± 0.0197 in)
Cable length at clutch release lever .......75 ± 1 mm
............................................. (2.95275 ± 0.0394 in)
LT320030
1
3
2