BMW K 1100 LT/RS - Manual (Page 165)

21.7
Removing clutch housing
• Secure retaining fixture?(1), BMW No. 11 2 800,
as shown.
• Release hexagon nut (2).
• Remove thrust ring (3) with pliers.
• Move clutch housing to and fro until O-ring (4) is
visible.
• Cut through O-ring.
• Pull off clutch housing.
L
Note:
Do not lose thrust washer (5).
e
Caution:
If clutch housing is difficult to move, use three-point
puller,
BMW No. 33 1 830 , and pressure tool.
Do not damage bushing for thrust bearing!
11 2 800
LT210030
4
2
3
1
LT210040
5