BMW K 1100 LT/RS - Manual (Page 200)

23.26
Installing bearing mount with main
stand
L
Note:
Clean threaded holes in transmission and retaining
bolts (recut thread).
• Place switch (1) for electric side support on bear-
ing mount, secure lead with cable clip (2).
• Note spacer sleeves (3).
• Coat bolts with Loctite 243, screw in and firmly
tighten.
X
Tightening torque:
Bearing mount to transmission ..................... 41 Nm
• Note line arrangement for electrical side stand.
LT230440
LT230490
1
2
3
LT230520