BMW K 1100 LT/RS - Manual (Page 234)

32.12
Removing and installing operating
cable for increasing starting speed
• Remove fuel tank.
• Remove operating lever (1).
• Detach cable (2).
• On throttle rail, release locknut (3) from adjusting
screw (4) and unscrew adjusting screw.
• Detach nipple (5).
• Remove cable by pulling from below.
• Install in the reverse order of removal.
L
Note:
Fit cable without kinks. Check setting of start speed
increase.
Adjusting instructions:
See Group 00, “Checking clutch operating clear-
ance, adjusting if necessary”.
LT320100
4
2
3
5
1