BMW K 1100 LT/RS - Manual (Page 172)

21.14
Removing and installing clutch
release lever
• Remove exhaust system.
• Detach clutch cable at clutch release lever.
• Remove retaining ring (4) and washer (3) on
right-hand side.
• Remove mounting pin (1) by pulling out to left.
• Remove clutch release lever (2).
• Install in the reverse order of removal.
L
Note:
Check clutch clearance and adjust if necessary.
X
Tightening torques:
Exhaust to cylinder head .............................. 21 Nm
Exhaust holder to footrest plate .................... 33 Nm
Exhaust retaining bracket to gearbox .......... 41 Nm
Front silencer ............................................... 12 Nm
LT210120
1 3 4 2