BMW K 1100 LT/RS - Manual (Page 242)

33.6
• Screw the rear wheel drive centrally with holder,
BMW No. 33 1 510, and bearing journal (1).
• Screw on locking arm (3).
• Move threaded bushings (5) into contact with the
rear wheel drive.
• Secure with wheel bolts (2).
• Screw the grub screws (4) up until they make
contact.
• Heat hexagon nut (6) on drive bevel gear to 100
°C and release with 36 mm (1.4173 in) socket
wrench insert and reducing adapter,
BMW No. 33 1 720.
e
Caution:
Never use a hammer to release the hexagon nut,
otherwise the splines can be easily damaged.
• Remove thrust ring (7).
• Heat housing to 120 °C and release threaded
ring (8) with pin wrench (2), BMW No. 33 1 700.
• Heat bearing seat to 120 °C in order to remove
the drive bevel gear (9).
LT330010
9
8
7
6
120°C 100°C
33 1 510
RT330350
1
4
2
5
1
3
33 1 720
RT330360
33 1 700