JLG X23J Operator Manual - Manual (Page 103)

99
BOOM LIFT MODELS X23J
JLG
X23JR0620113
When carrying out a rotation one of the restricted rotation areas is entered, the control board
checks the position of the first‑second arm. If this is sufficient to continue the rotation
without colliding with the outrigger or the engine, the rotation carries on, otherwise it stops
automatically and on the display appears the indication to rotate in the opposite direction
At this point it is possible to lift 1‑2 arm and the remaining arms or go back with the rotation.
It is not possible to continue with the rotation.
Similarly, if 1‑2 arm is lowered, as it is in a restricted rotation area, when reaching a certain
height the movement will an indication informing the operator to lift the 1‑2 arms.
At this point it is possible to rotate or lift the first‑second arm or move the remaining arms. It
is not possible to descend the 1‑2 arm.