JLG X23J Operator Manual User Manual
Page 119
Advertising
115
BOOM LIFT MODELS X23J
JLG
X23JR0620113
‑
Operate on the traversing control with extreme caution so as not to cause damage to
the machine or injury to persons.
Go into a suitable position to perform procedure A, through which the machine will be
re‑aligned;
‑
At the end of the operation release the key, remove it, put it back in its original position
and close the electric components compartment.
‑
The control circuit board memorises every activation of the safety device by‑pass key.
Advertising