JLG X23J Operator Manual User Manual

Page 122

Advertising
background image

• Do not place the battery charger near sources of heat.
• Make sure that the type of power supply available corresponds to the voltage specified

and indicated on the battery charger rating plate or in this user and operation manual. In
case of doubt, contact your reseller or the local electrical company.

• An AC class circuit breaker can be used as protection device for the battery charger

power supply, however it is recommended to use a class A or class B device.

• With regards to safety and electromagnetic compatibility, the battery charger features a

three‑pin plug with earth, which can only be plugged into an earthed socket. If the plug
does not go into the socket, most probably the socket is old and not earthed. In this case,
contact an electrician to have the socket replaced.
Do not use adapters to resolve earth plug problems.

• Make sure the power cable does not represent an obstacle. If the cable is worn or dama‑

ged, have it replaced immediately.

• If extensions or multiple sockets are used, make sure that these support the total rated

current.

• Disconnect the power supply before connecting or disconnecting the battery.
• The battery charger installed was specially designed to recharge the type of lithium batte‑

ries used on the platform. Do not attempt to recharge any other type of batteries.
Do not attempt to repair the battery charger. Opening the cover may expose the user to
the risk of electric shock.

• Do not open the battery charger, opening it may affect the index of protection (IP) even

after it has been closed again.

• If the battery charger is not working correctly or is damaged, disconnect it immediately

from the power outlet and the battery socket and contact an authorized servicing entity.

• To avoid overheating, make sure that all openings are not obstructed. Do not place the

battery charger near a heat source. Make sure that free space around the battery charger
is sufficient to provide adequate ventilation and an easy access to the cable sockets.

• Protect the battery charger from any sprinkling of water and do not spill liquids inside.
• Prohibition to recharge the machine in absence of an operator.
• Always monitor the charging of the vehicle.

BOOM LIFT MODELS X23J

JLG

118

X23JR0620113

Advertising