JLG X23J Operator Manual User Manual

Page 106

Advertising
background image

BOOM LIFT MODELS X23J

JLG

102

X23JR0620113

control. The safety condition and consequently the movements are reactivated as soon as the
pin is fitted in its seat or the microswitch is in the correct working configuration again.

THE USE OF THE MACHINE OUT OF THE PERMITTED WORKING AREAS BASED ON
THE STABILIZATION CONFIGURATION IS ABSOLUTELY FORBIDDEN.
The overturning of the machine may cause serious damages or death of the operator or of
the ground personnel.
The Constructor. is not liable for damages to people, animals or properties caused by an
improper use of the machine.

6.4.15 M

ANUAL LEVELLING OF THE CAGE

The JLG platform has an automatic levelling device for the cage. This device has been desi‑
gned in a way that the floor of the basket remains always parallel with the ground indepen‑
dently from the movements of the platform arms.

However, due to causes deriving from leaks and malfunctioning, it may be necessary to ope‑
rate manually to take the basket to the optimal position. Act as follows to make this adjust‑
ment:

try to take the basket to the traversing position by closing the extendable structure com‑
pletely (this, only if the problem was met while the basket was at a high position);

only carry out this operation if no basket levelling exceeds 10°. If this is not the case
carry out manual levelling at minimum height possible, compatibly with the limit of 10°.

PERICOLO

DANGER

Advertising