JLG X23J Operator Manual User Manual
Page 86
6.4.6 O
PERATIVE LOAD AUTOMATIC SELECTION
The JLG aerial platform envisions the possibility of working with two different operational
loads: 200kg or 120kg.
The operative load depends on the position of the JIB arm. If it is completely closed the
admitted working load is 200 kg and it is indicated by an icon in position 2 on the remote
control, if the JIB is not completely closed the admitted working load is 120 kg and it is indi‑
cated in position 2 on the remote control. If the operator attempts to open the JIB with more
than 120 kg in the basket the massage appears in the middle of the display.
If the admitted loading limits are exceeded all the aerial movements are prohibited, an alarm
message appears on the remote control and the buzzer enters into function. To restore the
functioning it is necessary to remove the extra load.
6.4.7 P
ASSAGE FROM TRANSPORT CONFIGURATION TO STABILISATION CONFIGURATION
S
TANDARD
VERSION
Starting from the transport configuration, act individually on each outrigger as follows:
‑
lift and hold up the outrigger joint locking pin overcoming the force of the spring;
BOOM LIFT MODELS X23J
JLG
82
X23JR0620113