JLG X23J Operator Manual User Manual
Page 111
107
BOOM LIFT MODELS X23J
JLG
X23JR0620113
The safety devices BY‑PASS icon will appear on the remote control display.
N
EVER PERFORM OPERATIONS DIFFERENT TO THOSE LISTED OR THAT CAN IN SOME WAY JEOPARDISE
THE STABILITY OF THE MACHINE
. T
HE SEQUENCE OF ARM MOVEMENTS MUST BE CARRIED OUT IN A
WAY TO PREVENT ANY OPERATION THAT COMPROMISES THE STABILITY OF THE MACHINE
.
‑ Once the machine is closed, release the key, remove it and put it back in its original posi‑
tion.
‑ The control circuit boardmemorises every activation of the safety devices by‑pass key.
N.B.: In case of machine with variable stabilization area the by‑pass of the safety measu‑
res does not allow to go out of the working area related to the stabilization configuration.
Control the machine from the remote control ONLY carrying out operations that allow
the closure of the same: first/second arm closure, extension closure, jib rotation closure.
The functions of rotation and third arm lowering have to be performed only with exten‑
sion completely closed.