JLG X23J Operator Manual - Manual (Page 170)

BOOM LIFT MODELS X23J
JLG
166 X23JR0620113
8.4 T
RANSPORTING THE MACHINE
Once on the trailer the machine must be fixed using tie‑rods according to the layout descri‑
bed in the photo below. Check that machine measurements and those of the trailer are com‑
patible with the provisions of the Highway Code.
The fixing systems connection points are identified by the sticker.
Do not make connections in points different to those identified by the
sticker. This could cause permanent damage to the structure with the danger
of collapsing.
F IXING HOOK
1703814A