JLG X23J Operator Manual User Manual

Page 173

Advertising
background image

169

BOOM LIFT MODELS X23J

JLG

X23JR0620113

ESSICAE A

Both ON indicate aerial part safety devices have been disconnected by the specially
provided key.

ESSICAE B
ESSICCA A

Both ON indicate undercarriage part safety devices have been disconnected by the
specially provided key.

ESSICCA B
EM.TERRA A

Both ON indicate that emergency stop button isn’t pressed ( from ground).

EM.TERRA B
FOTOA

Both ON indicate that the photocells are aligned.

FOTOB
EMTEL TERR

Both ON indicate that the remote control button isn’t pressed (from ground).

ST1‑2 CHIUSI

ON status indicates the stabilizers 1‑2 are completely up and pressurised.

ST3‑4 CHIUSI

ON status indicates the stabilizers 3‑4 are completely up and pressurised.

ALL.TEMP A

Both ON indicate the external temperature probe is activated (only Russian version).

ALL.TEMP B

ALTERN.

ON or OFF depending on whether, the engine is ON or OFF.

COM EMERG

ON position indicates the emergency buttons are activated.

MICROFUNI

ON position indicates both cables are working.

MARCIA MOTO ON position indicates the engine start button (from ground) is pressed.
TEMP.MOTO

OFF position with the engine running indicates the alarm is activated.

PRESS.MOTO

ON position with the engine running indicates the alarm is activated.

TER/NAV A

ON position indicates the remote control from ground is activated by the provided key.

MICROJIB A

Both ON indicates the JIB arm is completely closed.

MICROJIB B
PEDALE

ON position indicates the pedal within the basket is pressed. (only pedal version)

EMNAV A

Both ON indicates the emergency STOP (of the remote control) within the basket isn’t
pressed

EMNAV B
POSM 1A

Both ON indicates the stabilizer 1 is in stabilization position.

POSM 1B
POSM 2A

Both ON indicates the stabilizer 2 is in stabilization position.

POSM 2B
POSM 3A

Both ON indicates the stabilizer 3 is in stabilization position.

POSM 3B
POSM 4A

Both ON indicates the stabilizer 4 is in stabilization position.

POSM 4B
TEL.CESTO

ON position indicates the remote control is in its seat. ( in the basket).

INCLIN. X

Indicates the inclination of X axis in thenths of a degree.

INCLIN. Y

Indicates the inclination of Y axis in thenths of a degree.

PESO.

Indicates the weight in the basket in Kg.

POS. 1E2

Indicates 1° and 2° arm cylinder stroke in thenths of a millimeter.

POS. 3

Indicates 3° arm cylinder stroke in thenths of a millimeter.

ROTAZ A

Indicates the angular position of the aerial part in degrees ( 180° ‑ aligned photocells).

MOTORE RPM

Indicates the thermic engine speed.

CORRENTE A

Indicates the power to proportional valve.

CORRENTE B

Indicates the power to proportional valve.

CORRENTE C

Indicates the power to proportional valve.

TEMPERAT.

Indicates the temperature measured by the electrical probe.

ALIMENT(V)

Indicate the voltage ( In volt).

Advertising