JLG X23J Operator Manual - Manual (Page 87)

83
‑ start and turn the outrigger to take it towards the stabilisation configuration and release
the locking pin.
‑ at the end of outrigger rotation check that the pin, thanks to the action of the spring,
inserts into the relevant seat, BLOCKING the outrigger joint.
For the reverse operation, follow the instructions given above in the reverse order, checking
that at the end of the operation that each individual outrigger is blocked in the transport
position and cannot be moved, if not follow the above‑mentioned indications.
VERSION WITH VARIABLE STABILIZATION AREA
If the machine in your possession is equipped with variable stabili‑
zation area the use of every outrigger is allowed in three different
conditions of opening instead of two as in the standard version.
Transport position (closed), reduced stabilization position (rotated
about 24°) and total stabilization position (rotated about 58°).
BOOM LIFT MODELS X23J
JLG
X23JR0620113
STABILIZZAZIONE
TOTALE
STABILIZZAZIONE
RIDOTTA
CHIUSO
58°
24°
REDUCED
STABILIZATION
TOTAL
STABILIZATION
CLOSED