JLG X23J Operator Manual - Manual (Page 44)

3 SAFETY DEVICES
The notions stated below concerning the safety devices are made available to the user in
order to understand machine behaviour and possible work sequences; moreover, in this way
it is possible to identify any breakdowns with greater certainty in order to supply more
detailed information to the after‑sales service for quicker, less expensive interventions.
The machine is equipped with safety devices used to prevent dangerous situations for the
operator from occurring. It is important that before starting any operation, the operator
checks the perfect working order of these devices.
The non‑functioning of a safety device, whether caused by a fault or tampering, can cause
serious damage to the machine and consequently put the operator’s life at risk. The Con‑
structor has designed the machine and safety devices in order to guarantee the maximum to
its customers, however the devices must be checked periodically according to that described
in this manual and they must never be tampered with.
The service function on the remote control can be used as an aid for checking electric safety
devices.
Never intervene on the safety devices. If they are tampered with the manufacturer declines
all liability regarding any accidents that can be blamed on these interventions.
It is prohibited to tamper with the lead sealing or calibration of the maximum pressure val‑
ves and the adjustments of the electric components. If they are tampered with the manufac‑
turer declines liability for any accidents that can be blamed on these interventions.
The Constructor is not liable for any damage/injury caused by the machine to objects and/or
persons due to failure to comply of that stated above.
BOOM LIFT MODELS X23J
JLG
40 X23JR0620113