JLG X23J Operator Manual - Manual (Page 136)

7.9 I NSPECTION AND MAINTENANCE
All JLG aerial platform shall be inspected, tested and maintained according to the following
prescriptions. See in the Use and Maintenance manual the complete list and the recom‑
mended period of inspections and the correct procedure of check and maintenance.
A‑ DAILY PRESTART INSPECTIONS
All the component that have a direct bearing on the safe operation of the aerial platform and
whose status can change from day to day with use shall be visually inspected an a daily
basis by the operator.
The following shall be regularly inspected for defects and shall also be observed during ope‑
ration and between regular inspections for defects:
1. all fluids, such as fuel, engine oil, coolants, and battery fluid, for proper level;
2. hydraulic hoses for leaks or loose connections;
3. all quick disconnect hoses for proper connection;
4. structural components for obvious damage, broken parts, and cracks in welds;
5. ladder or steps for damage and debris (ladder shall be firmly secured to the platform);
6. operating and emergency controls for proper function;
7. placards and warning signs for cleanliness, readability of control markings, rated capa‑
city, and operating manual;
8. platform assembly for loose and missing parts, missing or loose lock pins and bolts, and
proper placement of the footswitch;
9. platform floor for structural damage, holes or cracked welds, dirt, grease, or oil that can
create a hazard;
10. access gate for ease of movement, missing parts, latched and locking capabilities;
11. fall protection system;
12. safety devices for malfunction;
13. proper operation of elevating, rotating, and drive functions;
14. brakes for stopping capabilities;
15. outriggers and stabilizers;
B –PERIODIC INSPECTIONS
This inspection shall be performed after 200 h of use or every month, whichever comes first.
The interval between inspections may vary depending on the aerial platform's activity, seve‑
rity of use, and the working environment. Periodic inspections shall be performed by a quali‑
fied person. This inspection shall include the requirements of point A and items that shall
include, but not be limited to, the following:
1. loose bolts, nuts, and pins;
2. hydraulic oil filter for cracks and leaks, metal chips or pieces on the filter that may deno‑
BOOM LIFT MODELS X23J
JLG
132 X23JR0620113