JLG X23J Operator Manual User Manual
Page 105
101
BOOM LIFT MODELS X23J
JLG
X23JR0620113
V
ARIABLE STABILIZATION AREA
All the instructions described in this paragraph are valid for the machines provided with
variable stabilization area.
In addition to this, in order to move the basket, it has to be considered that depending on the
position of the outriggers the rotation of the aerial part of the machine may be complete or
reduced, See diagram in paragraph “Passage from transport configuration to stabilization confi‑
guration”.
In case at least one of the outriggers is in reduced area position on the display of the remote
control appears an icon in position 1 (top ‑ left) which is always visible during the use of the
machine and informs the operator that the work is done in reduced stabilization area.
If, when the machine is stabilized in reduced area, you try to leave the allowed working area
rotating with the remote control levers the movement will be prohibited toward the exit and
a message on the display will appear informing that it is necessary to rotate in the opposite
direction in order to keep working.
If, when the machine is stabilized in reduced area, unintentionally or intentionally one of the
four outrigger blocking pins is lifted or the outrigger position control microswitch is viola‑
ted, all the movements will be prohibited and an error message will appear on the remote