JLG X23J Operator Manual - Manual (Page 124)

TECHNICAL SPECIFICATIONS
T=25°C unless otherwise specified.
Before use, carefully read the instruction booklet.
Make sure that the charge curve selected is suitable for the type of battery being rechar‑
ged.
BOOM LIFT MODELS X23J
JLG
120 X23JR0620113
Description Symbol Test conditions
Value and/or
Range
Unit
Single‑phase power supply voltage Vin ‑ 230 ± 10% Veff
Frequency f ‑ 50 ÷ 60 Hz
Maximum current drawn per phase
Ifmax P = Pmax
20 Aeff
Initial current peak ‑ Vin=230Veff < 1,35 A
Power factor cosφ
P = Pmax
0,68 ‑
Minimum power consumption Pinmin End of charge < 5 W
Maximum power consumption Pinmax P = Pmax 3 kW
Output current I ‑ 35 A
Output voltage U ‑ 72 V
Maximum power supplied Pmax U = U1, I = I1 2550 W
Operating temperature range ΔT ‑ da ‑20 a +50 °C
Maximum relative humidity RH ‑ 90% ‑
Switching frequency fc ‑ 30 ± 5% kHz
Efficiency η
Every operating con‑
dition
90% ‑
Maximum dimensions a×b×c
Without connection
cables
430Ч220Ч95 mm
ATTENZIONE ATTENTION