JLG X23J Operator Manual User Manual
Page 51
47
Control always the correct levelling of the machine after every self‑levelling operation.
Approximate levelling outside of the limits set by the manufacturer is very dangerous and
can jeopardise the stability of the platform creating sources of risk or even death for the ope‑
rator and other persons that operate in proximity of and on the machine.
Never intervene on the spirit level adjustments; this device is calibrated by the Constructor
during the inspection before sale. Only technicians authorised by the Constructor and in pos‑
session of suitable tools can intervene on the spirit level.
3.11 S
CREWS AND NUTS LOCKING PINS
All pins used on the JLG platform have been treated against wear and have a flange to pre‑
vent rotation within the seat.
The following safety parts are identified in each individual pin:
1‑
A
NTI
‑
ROTATION WING
: always check integrity and no relative wing‑pin rotation.
BOOM LIFT MODELS X23J
JLG
X23JR0620113
2
3
4
1