JLG X23J Operator Manual User Manual
Page 93
89
In the absence of one of these conditions, the use of the JIB arm is not possible and one of the
following error displays appears.
After these conditions have been verified, make sure that there are no obstacles in the Jib arm
working area and operate as follows:
‑
Activate the Joystick 6 for moving the JIB arm. If a different joystick is activated an error
message will appear on the display:
‑
AFTER THE SLOPE HAS BEEN PASSED, FOR WHICH THE JIB ARM HAD TO BE
OPENED, TAKE THE MACHINE BACK TO CLOSED CONFIGURATION TO CON‑
TINUE TRAVERSING.
‑
With the JIB arm open ALWAYS traverse at minimum speed and keep the JIB arm as
near as possible to the ground.
‑
It is PROHIBITED to face small hills with the JIB arm not completely closed.
BOOM LIFT MODELS X23J
JLG
X23JR0620113