Server settings – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 101
101
Server Settings
Figure: Server Settings Menu
The
menu contains the
Server settings. The menu
Server Settings
2N SmartCOM
®
has two parts.
The first menu part affects the server function directly and any change may to lead to
restart and subsequent disabling of work of other users. Set the listening port and http
port and enable the http daemon here. The user AT API settings are available here too.
Set the port for API connection and communication. There is a button for you to
enable/disable the API. Futhermore, set
packet encryption for the server. You can
enter ASCII characters, which will automatically be translated into Hexa for later server
settings. The key length is 32 hexa / 16 ASCII characters. Or, you can enter hexa
characters. The ASCII field is thus not applied. See the figure above. Set the
encryption mode in the Packet encryption mode parameter. There are three options.
DISABLED –
does not encrypt any data.
2N SmartCOM Server
®
OPTIONAL –
encrypts data if the counterparty requires
2N SmartCOM
®
Server
so.
FORCED –
encrypts all incoming and outgoing data.
2N SmartCOM
®
Server