2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 135)

135
2N TELEKOMUNIKACE a.s., www.2n.cz
®
11.1 Firmware Upgrade (Update)
The factory default firmware in can be upgraded using the 2N SmartCOM
®
2N
®
Control Panel or an AT command. Contact the SmartCOM 2N TELEKOMUNIKACE
®
. Technical Support staff for information on new functions and firmware versions. a.s
Enter the following command into the terminal to upgrade firmware.
at^scupg="http://$(SERVER_IP):http_port/SmartCOM_SC_v00–04.bin"
The command has to include the address of the server for downloading and the exact
name of the firmware file.
Caution
Make sure that connected to the Internet during 2N SmartCOM
®
is
the whole process of firmware upgrading to avoid firmware installation
failure.