2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 43)

43
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Enter the command to store the counter value in the EEPROM manually.
at^scpulse2?
Enter the command to display the current interface settings.
at^scpulse2=?
Enter the command to display the setting options for the interface.
General Commands
General commands for . 2N SmartCOM
®
at
A terminal function control command, which executes no action and always gets
the OK answer.
ate
Enter the command to disable echo (replies are displayed only instead of
commands).
ate0
Enter the command to disable echo.
ate1
Enter the command to enable echo.
at+cgmi
Enter the command to display the manufacturer – 2N SmartCOM
®
2N
®
Telekomunikace a.s.
at+cgmm
Enter the command to display the model - . 2N SmartCOM
®
at+cgmr
Enter the command to display the current firmware version - SC_vxx.xx.
at+cgsn
Enter the command to display the GSM module IMEI.
at+cimi