2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 72)

72
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Figure: WM-Bus Menu
Click on the required item in the to select a device and List of configured devices
push the buttons to the right to remove the item or add the decryption key.
Caution
The keys are added to the WM-Bus module directly for security
reasons and are not displayed in the configuration. Therefore, be
careful while configuring the keys.
A key adding error may lead to a decryption error.
Furthermore, you can to the list. Enter the device code and serial Add new device
number. Complete the timeout, e.g., in case the selected device sends multiple
identical pieces of information in a short time interval. The remaining parameters are
optional and need not be specified.
Warning
Contact the device manufacturer for precise identification details.
Enter all the identification parameters of the new device to enable
encryption in the device.