2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 92)

92
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Virtual Ports
Figure: Virtual Ports Menu
Administer virtual ports using the menu. Every user can use this menu Virtual Ports
as these settings only relate to the PC with which the user is working. This means that
where more PCs are used, the user must create the virtual ports for each of them.
This, however, applies to serial ports only; virtual ports are transferable to other PCs.
This option, however, can be disabled in the configuration.
Create TCP Port
To create a virtual TCP port, select
and enter the port to be created. Also, tick off Add
to enable the port use for the current PC only. Finally, click on Allow local host only
. Create
Figure: Create TCP Port
Create COM Port
A virtual COM port is created similarly as instructed above. Just select a port and click