2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 126)

126
2N TELEKOMUNIKACE a.s., www.2n.cz
®
4 UDF_RESP_ERROR_SYNTAX_LOGIC_MARK
Logic mark not
found or wrong
5 UDF_RESP_ERROR_SYNTAX_PARAM1
Condition
parameter 1 not
found or wrong
6 UDF_RESP_ERROR_SYNTAX_PARAM2
Condition
parameter 2 not
found or wrong
7 UDF_RESP_ERROR_SYNTAX_INVALID_CONDITION
Condition not
supported
8 UDF_RESP_ERROR_SYNTAX_ACTION
Action syntax
error
9 UDF_RESP_ERROR_SYNTAX_ACTION_TYPE
Action type not
supported
10 UDF_RESP_ERROR_PHONE_NUMBER_LEN
Telephone
number length
error
11 UDF_RESP_ERROR_PHONE_NUMBER
Telephone
number not
found or not
supported
12 UDF_RESP_ERROR_IP_ADDRESS
IP address not
found or not
supported
13 UDF_RESP_ERROR_IP_PORT IP port wrong
14 UDF_RESP_ERROR_RELAY_STATE
Relay state not
found or not
supported
15 UDF_RESP_ERROR_PARAM_PARSE
Action parameter
translation error
16 UDF_RESP_ERROR_PARAM_MARK
Unknown action
parameter type
17 UDF_RESP_ERROR_PARAM_MARK_TIMING_PERIOD
Timing period
wrong or beyond
limits
18 UDF_RESP_ERROR_PARAM_MESSAGE_LENGTH
Message length
error