2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 104
104
Caution
Just one default firmware version identical with the 2N SmartCOM
®
Control Panel FW version is available after a new server installation.
Add more firmware versions to the database if necessary.
If you just upgrade the
keeping the
2N SmartCOM Server
®
configuration instead of installing a new server, the firmware files will
be retained. The firmware list will be identical with the original one
plus a new default firmware version.
If you select a SC or SCE terminal for upgrade, the firmware versions
matching these HW types will only be listed to avoid false FW upload.
The right–hand window section displays a table including the list of all configured
terminals or terminal groups (View Groups/View Terminals).
View Terminals
The table includes six columns. The checkbox helps select a terminal to be updated.
The second column indicates whether the terminal is on–line or off–line. The terminal
name, serial number and current firmware versions are available here too. An actual or
scheduled upgrade is indicated by 'original FW new FW'. The Status field defines the
state of the terminal updating process as follows:
OK – update completed, terminal ready for work.
UPDATING – update in progress.
ERROR – update error.
UNKNOWN – terminal not connected yet (FW version unknown).
View Groups
The table includes only names of terminal groups and offers checkboxes for selection.
When you select a group and push
, all the terminals assigned to the selected
Update
group will be updated. Go back to
to display the update states of all
View Terminals
the terminals.
Caution
Remember to check off the firmware version and one
terminal/terminal group at least to enable the
button.
Update
Otherwise, Update will not be available.
Tick off the checkbox in the table header to select all table items, i.e.
all available terminals and/or terminal groups.