2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 76
Advertising
76
Figure: RTC Settings Menu
is another setting option. It displays the back-up battery charging state for
Charger
the
terminals. You can enable/disable the function and set the maximum
SC PRO
charging voltage and current.
Figure: Charger Menu
is the last accessible tag. You can define from which IP addresses it will be
IP access
possible to access the terminal. Attempts from non-listed IP addresses will be ignored.
Press
to enable the function and
to add an IPv4 address to the list. Click on an
ON
Add
item for selection and push
to delete an address from the list.
Remove
Advertising