2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 88)

88
2N TELEKOMUNIKACE a.s., www.2n.cz
®
7.3 Control Panel Use
The main purpose of the Control Panel is to virtualised ports and 2N SmartCOM
®
facilitate connection to terminals. The application also provides comfortable
administration and user management including assignment of terminal administration
rights, thus allowing users to manage a high number of terminals from one place as
well as assign small terminal groups to authorised users.
User Mode
Having singed in as the User, you get access to four items of the main menu only:
, , and . They are all you need for Terminals Connections Virtual Ports Settings
standard work with the terminals. You have been assigned to one of the groups by the
Administrator and so you are allowed to view the terminals assigned to this group only.
See below for details on the menus.
Terminals
Figure: User Mode Terminals Menu
The menu displays the terminals assigned to the group you have the right Terminals
to view.