Firmware management – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 103
Advertising
103
Firmware Management
Figure: Firmware Management Menu
The
menu is used for updating the
terminal
Firmware Management
2N SmartCOM
®
firmware via the
Server. The user selects a firmware version and
2N SmartCOM
®
ticks off the terminal or group of terminals to be updated. This enables the
but
Update
ton. Push the button to execute automatic update for all the selected terminals.
Note
The terminals that are off–line during the update will be updated as
soon as they log in to the
Server.
2N SmartCOM
®
There is a list of available FW versions in the left section of the window. Push the
Add
button to add a new firmware version to the list.
Advertising