2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 15)

15
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.3 Before You Start
Installation Conditions
Install the GSM antenna with respect to the signal quality in the 2N SmartCOM
®
location. Where the signal is poor, use a higher gain antenna (not included in the
delivery).
Install off sensitive devices and human bodies to avoid EM 2N SmartCOM
®
interference.
Refer to the Technical Parameters (
) for the allowed range of working S. 6
temperatures.
2N SmartCOM
®
may not be operated on sites exposed to direct sunshine or in
the vicinity of heat sources.
2N SmartCOM
®
is designed for indoor use. Never expose it to rain, running
water, condensation moisture, mist, etc.
2N SmartCOM
®
may not be exposed to aggressive gases, acid vapours,
solvents and similar chemicals.
Caution
Make sure that you are equipped with all necessary technical means,
particularly a GPRS supporting SIM card with PIN request disable or a
PIN identical with that set in the configuration. 2N SmartCOM
®