Links – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 98
98
Read – users with the
right may view the terminals and monitor their
Read
states without being able to configure then or connect to them.
Connect – users with the
right may view and also connect to the
Connect
terminals via the
menu.
Connections
Configure – users with the
right have the advantages of the two
Configure
user groups above and, moreover, may configure the communication parameters
of the terminal ports.
Monitor – not implemented yet. Prepared for future use.
Use the
menu to add/remove the terminal to be viewed by the users
Terminals
assigned to this group. Click on
and select an item from the list to add a terminal.
Add
Click on
to remove a terminal from the list.
Remove
The
menu includes a list of users assigned to this group. Click on
and select
Users
Add
an item from the list to add a user. Click on
to remove a user from the list.
Remove
Add Group
Click on the
button next to the filter setting. You will be asked to complete
Add group
the group name and rights to ensure a proper function. The parameters are limited and
you will be checked during entering. No name may be duplicated in the configuration.
You will be notified of any duplication in the configuration. You can also add a note to
the group. Click on
to create a new group.
Create
Links
Figure: Links Menu
The
menu displays the currently connected terminals and users. The
Links
Administrator can supervise and disconnect them if necessary. The table includes the