Admin mode, Users – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 96
96
Caution
By interrupting automatic login you also disable the Allow automatic
parameter. Thus, you will have to re-enable it to use autologin
login
again.
The application
checkbox helps you debug the application or just record
Logging
server communication.
The files are automatically split after reaching 10MB.
Admin Mode
The Admin user has access to all User mode menus plus the user and terminal
administering and server setting menus. The
menu includes the
,
Admin mode
Users
,
,
and
menus.
Groups Links Terminals, Server Settings
Firmware Management
See the subsections below for details.
Users
Figure: Users Menu
The
menu is used for user administration. The list of users is on left. A green dot
Users
before the user name means that the user is on–line (connected to the 2N
®
Server). A red dot means that the user is off–line (logged out).
SmartCOM