Terminals – 2N M2M Solution 2N SmartCom - User Manual 1.9.0 User Manual
Page 99
99
serial number, IP address and port of the selected terminal, the user currently working
with the terminal, the user IP address and active port. Find the
button in the
Stop
field.
Action
Tip
The
button is used for unconditional disconnection of a terminal
Stop
from the virtual ports regardless of the data transmission state.
Terminals
Figure: Admin Mode Terminals Menu
The
menu in the Admin mode is similar to that in the User mode but is
Terminals
extended by group assignment, terminal adding and terminal editing options.
A green dot before the terminal means that the terminal is on–line (connected to the
server) and you can get connected to it. A red dot means that the terminal is off–line.
Click on a terminal in the right–hand part of the screen to display the Terminal
including the terminal name, serial number, hardware version as well as count
Details