2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 131)

131
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Enter this command to list all the parameters.
--help or –h
Enter this command to print out this help with the list of commands.
--version or -V
Enter this command to print out the program version.
-d
Set data directory of the server.
Parameter get commands
–gListenPort
Enter this command to print out the listen port (port for the 2N SmartCOM
®
protocol).
–gHttpPort
Enter this command to print out the HTTP port.
–gAtPort
Enter this command to print out the AT API port.
–gTerminalPV1url
URL for update of terminals with the protocol version 1 (the 2N SmartCOM
®
oldest ones).
-gEncryptionKey
Print packet encryption key.
-gEncryptionMode
Print packet encryption mode (0: disabled, 1: optional, 2: forced).
Parameter set commands
–sListenPort
Enter this command to set the listen port (port for the 2N SmartCOM
®
protocol).
–sHttpPort
Enter this command to set the HTTP port.
–sAtPort