2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 87)

87
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Push the button to create new objects. Create
Click on the button to clear the currently Cancel
made changes.
Click on to save the currently made changes Save
and send them to the Server 2N SmartCOM
®
configuration.
Use this button to install the virtual serial port
driver.
Push the button to log out the currently Sign out
signed–in user.
Use to search the relevant table columns. Search
Use / to control the relay Switch on Switch off
contacts.
Use the button to display details on the terminal.
Click on to upgrade firmware of selected Update
terminals.
Click on to reset the factory default values Default
for all parameters.