2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 93)

93
2N TELEKOMUNIKACE a.s., www.2n.cz
®
on to make the com0com driver install the selected port into the PC. Create
Figure: Create COM Port
Having installed a COM port into the PC, activate the COM port. Although the port has
been added to the
table, the item shows NO. Therefore, click on Virtual ports Ready
this table row to view the port details and the button. Push the button to Refresh
change the port status from Ready – NO to Ready – YES.
Figure: Refresh Button