2N M2M Solution 2N SmartCom - User Manual 1.9.0 - Manual (Page 75)

75
2N TELEKOMUNIKACE a.s., www.2n.cz
®
The tag helps you set the UDF graphically and more easily in User defined functions
the application than using an AT command in the terminal. Just select the required
functions and set their parameters and the application itself will generate the relevant
AT command to be sent to the terminal, or to be stored for later use. Refer to Console
for the current terminal communication listing and to
for the list of Current settings
configured commands in the terminal.
Figure: User Defined Functions Menu
Refer to for more details on the UDF setting options. S. 9
The tag displays the current date, time and time zone data. You can also RTC settings
synchronise the device time with your PC time, or set the device time manually. Click
on
to confirm the settings. Save